The Competitive Edge For PVC Replacement Parts Cooling Tower Products is a manufacturer, and direct supplier of PVC Fill, Drift Eliminators and Louvers for all makes and models of cooling towers, specializing in after market sales since 1975. During this time, we have accumulated a broad range of tower information that can be helpful in cross referencing both current and obsolete towers for replacement parts. Keeping your cooling towers operating at maximum efficiency means saving lots of money, but the very nature and function of a cooling tower often demands that they be situated in a remote area. These areas often make inspection and preventative maintenance difficult at best. The wetted components, fill, drift eliminators and louvers play a major role in determining if your tower is operating efficiently. They are prone to deposit scaling and biological growth as well as abuse from fire hoses, acid, excess heat and uv light. While it's hard to make efficiency claims about one product over another, we can make statements based upon a enthalpy chart. If we can return water from the tower just 1 (f) degree colder, it will reduce the system energy requirements by 3 1/4 percent. A typical fill, drift eliminator and louver installation can reduce water temperature by 3 (f) degrees, reflecting almost a 10% savings. We rebuild several towers every year that show a 7 (f) degree or better water temperature reduction. A typical downtown high rise building with a 1000 ton system with a 3 (f) degree drop could save $20,000 a year. This savings will more than pay for the tower rebuild. We also routinely disassemble towers, abrasive blast, fiberglass and epoxy coat the interior adding up to 15 years of additional life. Please link to the Arizona services button to your left to find more details about this service. Check back soon, as we are continuing to build this site into a useful tool for the industry. Thanks for visiting; The Management & Employees